Injection Moulding Process Technician
- Recruiter
- Confidential
- Location
- Christchurch
- Salary
- Competitive
- Posted
- 01 Oct 2021
- Closes
- 27 Oct 2021
- Sectors
- Health, Nursing & Social Care
- Contract Type
- Permanent
- Hours
- Full Time
Brief Role Description:
We have been retained by our client to assist them in their search for an Injection Moulding Process Technician.
Responsibilities:
• As a member of the on-site Operations team to effectively contribute to the success of the company
• Under the direction of the Production Supervisor, and in close partnership with all other operational disciplines (Shift Supervisor, Quality Supervisor, Machine Operator, Engineering Manager etc.), on a shift-by-shift basis, to ensure that production targets are met in compliance with both immediate and forecast customer demands, and activities are carried out in the most effective manner.
• To maintain control, set and optimise the injection moulding process (es) and to provide support to the execution of the production schedule (component changes, setups, start-ups, cleaning, engineering specifications etc.)
• Responsible for directing and monitoring the execution of the production schedule, performing tasks including (but not limited to) mould and/or material changes as dictated by the schedule, process set-up, process troubleshooting, and other necessary functions to ensure component part conformity to specification and all data relevant to process or machine downtime is captured and recorded correctly
• To effectively utilise all available resources (personnel, plant, etc.), which may involve other operational and quality department personnel, in order to fulfil the above.
• Where appropriate, to contribute and provide pertinent information
• QMS and ensure that all activities carried out within the remit of 'Process Technician' are at all times in compliance the companies QMS.
• In exceptional circumstances, and when required, to contribute effectively to 'non-base business activities' such as process validation, new product introduction, special projects etc. where such activities fall within the role of 'Process Technician'.
• To comply with all aspects of good manufacturing practices whilst carry out work duties.
• To contribute to the company's continuous improvement initiatives and, where appropriate, identify and report areas of potential improvement to the Operations & Quality Manager for consideration.
• To comply with Health, Safety & Environmental policies and procedures.
• To carry out any other agreed duties which reasonably fall within the remit of 'Process Technician'.
Key Qualifications/Skills:
• The technician is required to be a BPTA or similar trained Injection mould setter with familiarisation of GMP
• Be conversant with a wide range of raw materials from Polycarbonate, ABS to Polypropylene etc
• Have good knowledge of processing and moulding analytical tools.
• The candidate should be familiar with Medical IQ/OQ/PQ validations
• The candidate should be able to demonstrate a pro-active approach to problem solving and an exceptional knowledge of the injection moulding process
• Robotic programming would be an advantage, Staubli, Yushin & Sepro
Job Application:
If you would like to be considered for this role, please apply to send a copy of your full CV - or call us now.
Whilst this position may not be of interest to you or suit your skills and experience, please don't hesitate to get in contact with a member of the team at Willcox Matthews to understand how we can support you.
We receive a large number of applications for all of our positions - Therefore, If you have not received a response within 10 working days, your application has unfortunately been unsuccessful on this occasion.
Candidates must be eligible to work and live in the UK
We have been retained by our client to assist them in their search for an Injection Moulding Process Technician.
Responsibilities:
• As a member of the on-site Operations team to effectively contribute to the success of the company
• Under the direction of the Production Supervisor, and in close partnership with all other operational disciplines (Shift Supervisor, Quality Supervisor, Machine Operator, Engineering Manager etc.), on a shift-by-shift basis, to ensure that production targets are met in compliance with both immediate and forecast customer demands, and activities are carried out in the most effective manner.
• To maintain control, set and optimise the injection moulding process (es) and to provide support to the execution of the production schedule (component changes, setups, start-ups, cleaning, engineering specifications etc.)
• Responsible for directing and monitoring the execution of the production schedule, performing tasks including (but not limited to) mould and/or material changes as dictated by the schedule, process set-up, process troubleshooting, and other necessary functions to ensure component part conformity to specification and all data relevant to process or machine downtime is captured and recorded correctly
• To effectively utilise all available resources (personnel, plant, etc.), which may involve other operational and quality department personnel, in order to fulfil the above.
• Where appropriate, to contribute and provide pertinent information
• QMS and ensure that all activities carried out within the remit of 'Process Technician' are at all times in compliance the companies QMS.
• In exceptional circumstances, and when required, to contribute effectively to 'non-base business activities' such as process validation, new product introduction, special projects etc. where such activities fall within the role of 'Process Technician'.
• To comply with all aspects of good manufacturing practices whilst carry out work duties.
• To contribute to the company's continuous improvement initiatives and, where appropriate, identify and report areas of potential improvement to the Operations & Quality Manager for consideration.
• To comply with Health, Safety & Environmental policies and procedures.
• To carry out any other agreed duties which reasonably fall within the remit of 'Process Technician'.
Key Qualifications/Skills:
• The technician is required to be a BPTA or similar trained Injection mould setter with familiarisation of GMP
• Be conversant with a wide range of raw materials from Polycarbonate, ABS to Polypropylene etc
• Have good knowledge of processing and moulding analytical tools.
• The candidate should be familiar with Medical IQ/OQ/PQ validations
• The candidate should be able to demonstrate a pro-active approach to problem solving and an exceptional knowledge of the injection moulding process
• Robotic programming would be an advantage, Staubli, Yushin & Sepro
Job Application:
If you would like to be considered for this role, please apply to send a copy of your full CV - or call us now.
Whilst this position may not be of interest to you or suit your skills and experience, please don't hesitate to get in contact with a member of the team at Willcox Matthews to understand how we can support you.
We receive a large number of applications for all of our positions - Therefore, If you have not received a response within 10 working days, your application has unfortunately been unsuccessful on this occasion.
Candidates must be eligible to work and live in the UK