Coded Pipe Welders, Pipe Fitters, Mates
- Recruiter
- Anonymous
- Location
- Ely
- Salary
- 17.00 - 20.00 GBP Hourly + depnds on skill/quals/role
- Posted
- 05 Jul 2017
- Closes
- 02 Aug 2017
- Sectors
- Engineering
- Contract Type
- Permanent
- Hours
- Full Time
FULCRUM ENGINEERING & TECHNICAL
OUR ACTING AS AN EMPLOYMENT BUSINESS
ON BEHALF OF OUR CLIENTS ON A TEMP/CONTRACT BASIS OR
TEMP/PERM, OR PERM BASIS DEPENDING ON ROLES
WE ARE RECRUITING SKILLED & EXPERIENCED PERSONNEL SUCH AS : -
JOB TITLE - = PIPE FITTERS, PIPE FITTER FABS,
CODED PIPE WELDERS & PIPE FITTER WELDERS,
ALSO INDUSTRIAL BOILER INSTALL & SERVICE ENGINEERS
NO REQ = 2 + FOR EACH ROLE
KEY QUALS C&G, NVQ IN PIPE FITTING OR WELDING FABRICATION OR MECHANICAL ENGINEERING
WELDERS = IDEALLY WITH CURRENT WELD CERTS TIG & MMA
SAFETY CARDS ECS OR CSCS CARD - IDEALLY WITH IPAF OP OR MEWP CARD
IDEALLY WITH PASMA, ABRASIVE WHEEL CERTS/CARDS
SITE LOCATION = WORKING IN THE FAB SHOP & SITES
ELY & CAMBRIDE, PLUS OTHERS AS REQUIRED THETFORD, BURY ST EDMUNDS, HAVERHILL, SUDBURY, STOWMARKET SITES
PLUS OTHERS BASED FROM BURY ST EDMUNDS & COVERING ,SUFFOLK, NORFOLK, CAMBS, BEDS, HERTS, ESSEX, LONDON AREAS
40 MILES RADIUS NORMALLY FROM THE WORK SHOP AN OFFICES
START DATE - ASAP
IDEALLY WITH IPAF, PASMA, ABRASIVE WHEELS
SITE LOCATION - AS ABOVE
START DATE - ASAP
TERM OF WORK 8 - 16 WEEKS SUBJECT TO WORK LOAD PLUS WORK IN OTHER AREAS - SITES
TYPE OF WORK & SITE = WORKING ON INDUSTRIAL SITES, WORKING ON FOOD PROCESS FACTORIES, CHEMICAL PLANTS & FACTORIES,
POWER STATIONS ETC WORKING ON THE REMOVAL, MAINTENANCE & RE - INSTALLATION OF MACHINERY & PLANT.
ALSO FITTING IN NEW BOILERS & PIPING UP ETC.
FABRICATING, FITTING & WELDING WHERE REQUIRED MAINLY USING TIG
DUTIES = FABRICATION AND INSTALLATION OF STAINLESS STEEL PROCESS PIPE WORK 2 - 4 INCH & 6 - 12 INCH. ALSO SOME SMALL BORE PIPE WORK PLUS 1/2 TO 2 SCREWED & MAYPRESS PIPEWORK FOR LABS AREAS
PIPE FITTER WELDERS
FABRICATING PIPE AND WELDING USING TIG WELDING MAINLY
WORKING ON 2 - 4 INCH & 6 - 12 INCH PROCESS PIPE WORK IN CARBON & STAINLESS.
WORKING FROM ISOMETRIC, GA, ENGINEERING DRAWINGS
WELDING TO CODED SPECS
CODED PIPE WELDERS
PIPE WELDING USING TIG WELDING MAINLY, PLUS SOME MMA
WORKING ON 2 - 4 INCH & 6 - 12 INCH PROCESS PIPE WORK IN CARBON & STAINLESS.
WORKING FROM ISOMETRIC, GA, ENGINEERING DRAWINGS
WELDING TO CODED SPECS
INDUSTRIAL BOILER ENGINEERS
WILL BE WORKING ON INSTALL WORK OR MAINLY SERVICING WORK ON LARGE INDUSTRIAL/COMMERCIAL TYPE BOILERS.
WORKING IN HOSPITALS, BUILDING, FACTORIES, PROCESS PLANTS ETC.
IDEALLY WITH QUALS COVERING COMBUSTION & GAS ENGINEEERING
WITH GAS SAFE CERTS
QUALITIES & SKILLES REQUIRED = EXPEREINCE OF INDUSTRIAL CHEMICAL PLANT AND FACTORY TYPE WORK
TOOLS & EQUIPMENT REQUIRED = HAND TOOLS, BATTERY DRILL, OVERALLS, HIGH VIS VEST, SAFETY HELMET, GRINDING GOGGLES, SAFETY SPECS
HOURS AND DAYS OF WORK = (Apply online only) MON - FRI PLUS SAT & SUN IF REQUIRED WORKING 8.5 - 11.5 HRS PER DAY
TEMP PAY RATES = GBP17 + = PER HOUR MON - FRI & GBP20 + PER HR SAT
FULCRUM ENGINEERING & TECHNICAL
OUR ACTING AS AN EMPLOYMENT BUSINESS
ON BEHALF OF OUR CLIENTS ON A TEMP/CONTRACT BASIS OR
PERM BASIS
WE ARE RECRUITING SKILLED & EXPERIENCED PERSONNEL SUCH AS : -
JOB TITLE - = PIPE FITTERS, PIPE FITTER FABS,CODED PIPE WELDERS & PIPE FITTER WELDERS, ALSO INDUSTRIAL BOILER INSTALL & SERVICE ENGINEERS
NO REQ = 2 + FOR EACH ROLE
KEY QUALS C&G, NVQ IN PIPE FITTING OR WELDING FABRICATION OR MECHANICAL ENGINEERING
WELDERS = IDEALLY WITH CURRENT WELD CERTS TIG & MMA
SAFETY CARDS ECS OR CSCS CARD - IDEALLY WITH IPAF OP OR MEWP CARD
IDEALLY WITH PASMA, ABRASIVE WHEEL CERTS/CARDS
SITE LOCATION = CAMBRIDGE & ROYSTON SITES
PLUS OTHERS BASED FROM BURY ST EDMUNDS & COVERING ,SUFFOLK, NORFOLK, CAMBS, BEDS, HERTS, ESSEX, LONDON AREAS
70 MILES RADIUS NORMALLY FROM THE WORK SHOP AN OFFICES
START DATE - ASAP
IDEALLY WITH IPAF, PASMA, ABRASIVE WHEELS
SITE LOCATION - AS ABOVE
START DATE - asap
TERM OF WORK 8 - 26 WEEKS SUBJECT TO WORK LOAD
TYPE OF WORK & SITE = WORKING ON INDUSTRIAL SITES, WORKING ON HOSPITALS, FOOD PROCESS FACTORIES & CHEMICAL PLANTS AND FACTORIES REMOVAL, MAINTENANCE & RE - INSTALLATION OF MACHINERY & PLANT.
ALSO FITTING IN NEW BOILERS & PIPING UP ETC.
FABRICATING, FITTING & WELDING WHERE REQUIRED MAINLY USING TIG
DUTIES = FABRICATION AND INSTALLATION OF STAINLESS STEEL SMALL BORE PIPE WORK PLUS 1/2 TO 2 SCREWED & MAYPRESS PIPEWORK FOR LABS AND HOSPITAL AREAS
FABRICATING PIPE AND WELDING USING TIG WELDING MAINLY
INDUSTRIAL BOILER ENGINEERS
WILL BE WORKING ON INSTALL WORK OR MAINLY SERVICING WORK ON LARGE INDUSTRIAL/COMMERCIAL TYPE BOILERS.
WORKING IN HOSPITALS, BUILDING, FACTORIES, PROCESS PLANTS ETC.
IDEALLY WITH QUALS COVERING COMBUSTION & GAS ENGINEEERING
WITH GAS SAFE CERTS
QUALITIES & SKILLES REQUIRED = EXPEREINCE OF INDUSTRIAL CHEMICAL PLANT AND FACTORY TYPE WORK
TOOLS & EQUIPMENT REQUIRED = HAND TOOLS, BATTERY DRILL, OVERALLS, HIGH VIS VEST, SAFETY HELMET, GRINDING GOGGLES, SAFETY SPECS
HOURS AND DAYS OF WORK = (Apply online only) MON - FRI PLUS SAT & SUN IF REQUIRED WORKING 8.5 - 10.5 HRS PER DAY
TEMP PAY RATES = ?? GBP17 + = PER HOUR MON - FRI & ?? GBP20 + PER HR SAT
PERM PAY RATES = ?? GBP14.75 PER HR BASIC 40 HOURS THEN OVERTIME
OUR ACTING AS AN EMPLOYMENT BUSINESS
ON BEHALF OF OUR CLIENTS ON A TEMP/CONTRACT BASIS OR
TEMP/PERM, OR PERM BASIS DEPENDING ON ROLES
WE ARE RECRUITING SKILLED & EXPERIENCED PERSONNEL SUCH AS : -
JOB TITLE - = PIPE FITTERS, PIPE FITTER FABS,
CODED PIPE WELDERS & PIPE FITTER WELDERS,
ALSO INDUSTRIAL BOILER INSTALL & SERVICE ENGINEERS
NO REQ = 2 + FOR EACH ROLE
KEY QUALS C&G, NVQ IN PIPE FITTING OR WELDING FABRICATION OR MECHANICAL ENGINEERING
WELDERS = IDEALLY WITH CURRENT WELD CERTS TIG & MMA
SAFETY CARDS ECS OR CSCS CARD - IDEALLY WITH IPAF OP OR MEWP CARD
IDEALLY WITH PASMA, ABRASIVE WHEEL CERTS/CARDS
SITE LOCATION = WORKING IN THE FAB SHOP & SITES
ELY & CAMBRIDE, PLUS OTHERS AS REQUIRED THETFORD, BURY ST EDMUNDS, HAVERHILL, SUDBURY, STOWMARKET SITES
PLUS OTHERS BASED FROM BURY ST EDMUNDS & COVERING ,SUFFOLK, NORFOLK, CAMBS, BEDS, HERTS, ESSEX, LONDON AREAS
40 MILES RADIUS NORMALLY FROM THE WORK SHOP AN OFFICES
START DATE - ASAP
IDEALLY WITH IPAF, PASMA, ABRASIVE WHEELS
SITE LOCATION - AS ABOVE
START DATE - ASAP
TERM OF WORK 8 - 16 WEEKS SUBJECT TO WORK LOAD PLUS WORK IN OTHER AREAS - SITES
TYPE OF WORK & SITE = WORKING ON INDUSTRIAL SITES, WORKING ON FOOD PROCESS FACTORIES, CHEMICAL PLANTS & FACTORIES,
POWER STATIONS ETC WORKING ON THE REMOVAL, MAINTENANCE & RE - INSTALLATION OF MACHINERY & PLANT.
ALSO FITTING IN NEW BOILERS & PIPING UP ETC.
FABRICATING, FITTING & WELDING WHERE REQUIRED MAINLY USING TIG
DUTIES = FABRICATION AND INSTALLATION OF STAINLESS STEEL PROCESS PIPE WORK 2 - 4 INCH & 6 - 12 INCH. ALSO SOME SMALL BORE PIPE WORK PLUS 1/2 TO 2 SCREWED & MAYPRESS PIPEWORK FOR LABS AREAS
PIPE FITTER WELDERS
FABRICATING PIPE AND WELDING USING TIG WELDING MAINLY
WORKING ON 2 - 4 INCH & 6 - 12 INCH PROCESS PIPE WORK IN CARBON & STAINLESS.
WORKING FROM ISOMETRIC, GA, ENGINEERING DRAWINGS
WELDING TO CODED SPECS
CODED PIPE WELDERS
PIPE WELDING USING TIG WELDING MAINLY, PLUS SOME MMA
WORKING ON 2 - 4 INCH & 6 - 12 INCH PROCESS PIPE WORK IN CARBON & STAINLESS.
WORKING FROM ISOMETRIC, GA, ENGINEERING DRAWINGS
WELDING TO CODED SPECS
INDUSTRIAL BOILER ENGINEERS
WILL BE WORKING ON INSTALL WORK OR MAINLY SERVICING WORK ON LARGE INDUSTRIAL/COMMERCIAL TYPE BOILERS.
WORKING IN HOSPITALS, BUILDING, FACTORIES, PROCESS PLANTS ETC.
IDEALLY WITH QUALS COVERING COMBUSTION & GAS ENGINEEERING
WITH GAS SAFE CERTS
QUALITIES & SKILLES REQUIRED = EXPEREINCE OF INDUSTRIAL CHEMICAL PLANT AND FACTORY TYPE WORK
TOOLS & EQUIPMENT REQUIRED = HAND TOOLS, BATTERY DRILL, OVERALLS, HIGH VIS VEST, SAFETY HELMET, GRINDING GOGGLES, SAFETY SPECS
HOURS AND DAYS OF WORK = (Apply online only) MON - FRI PLUS SAT & SUN IF REQUIRED WORKING 8.5 - 11.5 HRS PER DAY
TEMP PAY RATES = GBP17 + = PER HOUR MON - FRI & GBP20 + PER HR SAT
FULCRUM ENGINEERING & TECHNICAL
OUR ACTING AS AN EMPLOYMENT BUSINESS
ON BEHALF OF OUR CLIENTS ON A TEMP/CONTRACT BASIS OR
PERM BASIS
WE ARE RECRUITING SKILLED & EXPERIENCED PERSONNEL SUCH AS : -
JOB TITLE - = PIPE FITTERS, PIPE FITTER FABS,CODED PIPE WELDERS & PIPE FITTER WELDERS, ALSO INDUSTRIAL BOILER INSTALL & SERVICE ENGINEERS
NO REQ = 2 + FOR EACH ROLE
KEY QUALS C&G, NVQ IN PIPE FITTING OR WELDING FABRICATION OR MECHANICAL ENGINEERING
WELDERS = IDEALLY WITH CURRENT WELD CERTS TIG & MMA
SAFETY CARDS ECS OR CSCS CARD - IDEALLY WITH IPAF OP OR MEWP CARD
IDEALLY WITH PASMA, ABRASIVE WHEEL CERTS/CARDS
SITE LOCATION = CAMBRIDGE & ROYSTON SITES
PLUS OTHERS BASED FROM BURY ST EDMUNDS & COVERING ,SUFFOLK, NORFOLK, CAMBS, BEDS, HERTS, ESSEX, LONDON AREAS
70 MILES RADIUS NORMALLY FROM THE WORK SHOP AN OFFICES
START DATE - ASAP
IDEALLY WITH IPAF, PASMA, ABRASIVE WHEELS
SITE LOCATION - AS ABOVE
START DATE - asap
TERM OF WORK 8 - 26 WEEKS SUBJECT TO WORK LOAD
TYPE OF WORK & SITE = WORKING ON INDUSTRIAL SITES, WORKING ON HOSPITALS, FOOD PROCESS FACTORIES & CHEMICAL PLANTS AND FACTORIES REMOVAL, MAINTENANCE & RE - INSTALLATION OF MACHINERY & PLANT.
ALSO FITTING IN NEW BOILERS & PIPING UP ETC.
FABRICATING, FITTING & WELDING WHERE REQUIRED MAINLY USING TIG
DUTIES = FABRICATION AND INSTALLATION OF STAINLESS STEEL SMALL BORE PIPE WORK PLUS 1/2 TO 2 SCREWED & MAYPRESS PIPEWORK FOR LABS AND HOSPITAL AREAS
FABRICATING PIPE AND WELDING USING TIG WELDING MAINLY
INDUSTRIAL BOILER ENGINEERS
WILL BE WORKING ON INSTALL WORK OR MAINLY SERVICING WORK ON LARGE INDUSTRIAL/COMMERCIAL TYPE BOILERS.
WORKING IN HOSPITALS, BUILDING, FACTORIES, PROCESS PLANTS ETC.
IDEALLY WITH QUALS COVERING COMBUSTION & GAS ENGINEEERING
WITH GAS SAFE CERTS
QUALITIES & SKILLES REQUIRED = EXPEREINCE OF INDUSTRIAL CHEMICAL PLANT AND FACTORY TYPE WORK
TOOLS & EQUIPMENT REQUIRED = HAND TOOLS, BATTERY DRILL, OVERALLS, HIGH VIS VEST, SAFETY HELMET, GRINDING GOGGLES, SAFETY SPECS
HOURS AND DAYS OF WORK = (Apply online only) MON - FRI PLUS SAT & SUN IF REQUIRED WORKING 8.5 - 10.5 HRS PER DAY
TEMP PAY RATES = ?? GBP17 + = PER HOUR MON - FRI & ?? GBP20 + PER HR SAT
PERM PAY RATES = ?? GBP14.75 PER HR BASIC 40 HOURS THEN OVERTIME